MANILA, Philippines - The October 2017 Metallurgical Engineer board exam results, which include the full list of passers, topnotchers (top 10), top performing school and performance of schools are available on this page as officially released by the Professional Regulation Commission (PRC) and the Board of Metallurgical Engineering on Monday, October 23, 2017 or in two (2) working days after the exam.
PRC administered the Metallurgical Engineer board exam on October 17, 18 and 19 in the cities of Manila and Davao.
The members of the Board of Metallurgical Engineering who gave the licensure examination are Agustin M. Fudolig, Chairman and Juancho Pablo S. Calvez, Member.
Roll of Successful Examinees in the
METALLURGICAL ENGINEER LICENSURE EXAMINATION
Held on OCTOBER 17, 2017 & FF. DAYS
Released on OCTOBER 23, 2017
The successful examinees who garnered the ten (10) highest places in the October 2017 Metallurgical Engineer Licensure Examination are the following:
Updating for the list of topnotchers...
The performance of schools in the October 2017 Metallurgical Engineer Licensure Examination in alphabetical order as per R.A. 8981 otherwise known as PRC Modernization Act of 2000 Section 7(m) "To monitor the performance of schools in licensure examinations and publish the results thereof in a newspaper of national circulation" is as follows:
Updating for the performance of schools...
REGISTRATION AND OATHTAKING
PRC said that registration for the issuance of Professional Identification Card (ID) and Certificate of Registration will be done on-line. Please go to www.prc.gov.ph and follow instructions for initial registration.
Those who will register are required to bring the following:
Successful examinees should personally register and sign in the Roster of Registered Professionals.
The oathtaking ceremony of the successful examinees in the said examination as well as the previous ones who have not taken their Oath of Professional will be announced later, PRC said.
VERIFICATION OF RATINGS
In just few working days after the release of results, all takers may verify their ratings online through PRC's verification of rating page. Just enter the required information in the appropriate fields to verify your identity.
COVERAGE OF EXAM
The three-day examination for the aspiring Metallurgical engineers covered the following subjects:
Metallurgy I: mineral processing, pyromettalurgy, metallurgical fuel, technology, refractory science, hydrometallurgy, electrometallurgy and metallurgical physical chemistry
Metallurgy II: physical metallurgy, mechanical metallurgy, crystallography, metallography, iron and steel metallurgy, non-ferrous metallurgy and foundry metallurgy
Metallurgy III: inorganic qualitative and quantitative chemistry, metallurgical law, jurisprudence, ethics, statistics and experimental design, engineering economics, mechanics, hydraulics and design of simple metallurgical process, operation, plants of facilities
RELEASE OF RESULTS
According to PRC Resolution No. 2016-1019, the target release date of results of the recent Metallurgical Engineer board exam is on Monday, October 23 or in 2 working days after the test.
In the same period last year (October 2016), results were announced in two (2) working days after the exam. A total of 58 out of 71 passed the exams. Aliza Marie Padilla Salces from Mindanao State University - Iligan Institute of Technology (MSU-IIT) aced the board with 87.85%.
Meanwhile, the October 2015 exams which produced 50 licensed engineers have its results announced on the last day of examination as the exam was held using the Computer-Based Examination (CBE). Stephen John Alisan Tamayo from University of the Philippines (UP) - Diliman topped the board with 87.65%.
Here's the overview of previous examinations:
UPDATES
Monitor announcement of results on this page or visit the official website of PRC (prc.gov.ph) for more information.
— The Summit Express
PRC administered the Metallurgical Engineer board exam on October 17, 18 and 19 in the cities of Manila and Davao.
The members of the Board of Metallurgical Engineering who gave the licensure examination are Agustin M. Fudolig, Chairman and Juancho Pablo S. Calvez, Member.
Roll of Successful Examinees in the
METALLURGICAL ENGINEER LICENSURE EXAMINATION
Held on OCTOBER 17, 2017 & FF. DAYS
Released on OCTOBER 23, 2017
Now updating for the official list of passers...refresh page for the results.
The successful examinees who garnered the ten (10) highest places in the October 2017 Metallurgical Engineer Licensure Examination are the following:
Updating for the list of topnotchers...
The performance of schools in the October 2017 Metallurgical Engineer Licensure Examination in alphabetical order as per R.A. 8981 otherwise known as PRC Modernization Act of 2000 Section 7(m) "To monitor the performance of schools in licensure examinations and publish the results thereof in a newspaper of national circulation" is as follows:
Updating for the performance of schools...
REGISTRATION AND OATHTAKING
PRC said that registration for the issuance of Professional Identification Card (ID) and Certificate of Registration will be done on-line. Please go to www.prc.gov.ph and follow instructions for initial registration.
Those who will register are required to bring the following:
- duly accomplished Oath Form or Panunumpa ng Propesyonal
- 2 pieces passport size picture (colored with white background and complete name tag) and
- 2 sets of documentary stamps
Successful examinees should personally register and sign in the Roster of Registered Professionals.
The oathtaking ceremony of the successful examinees in the said examination as well as the previous ones who have not taken their Oath of Professional will be announced later, PRC said.
VERIFICATION OF RATINGS
In just few working days after the release of results, all takers may verify their ratings online through PRC's verification of rating page. Just enter the required information in the appropriate fields to verify your identity.
COVERAGE OF EXAM
The three-day examination for the aspiring Metallurgical engineers covered the following subjects:
Metallurgy I: mineral processing, pyromettalurgy, metallurgical fuel, technology, refractory science, hydrometallurgy, electrometallurgy and metallurgical physical chemistry
Metallurgy II: physical metallurgy, mechanical metallurgy, crystallography, metallography, iron and steel metallurgy, non-ferrous metallurgy and foundry metallurgy
Metallurgy III: inorganic qualitative and quantitative chemistry, metallurgical law, jurisprudence, ethics, statistics and experimental design, engineering economics, mechanics, hydraulics and design of simple metallurgical process, operation, plants of facilities
RELEASE OF RESULTS
According to PRC Resolution No. 2016-1019, the target release date of results of the recent Metallurgical Engineer board exam is on Monday, October 23 or in 2 working days after the test.
In the same period last year (October 2016), results were announced in two (2) working days after the exam. A total of 58 out of 71 passed the exams. Aliza Marie Padilla Salces from Mindanao State University - Iligan Institute of Technology (MSU-IIT) aced the board with 87.85%.
Meanwhile, the October 2015 exams which produced 50 licensed engineers have its results announced on the last day of examination as the exam was held using the Computer-Based Examination (CBE). Stephen John Alisan Tamayo from University of the Philippines (UP) - Diliman topped the board with 87.65%.
Here's the overview of previous examinations:
| Exam Date | Total Examinees | Total Passers | Passing Rate | Days before results release |
|---|---|---|---|---|
| October 2017 | TBA | TBA | TBA | TBA |
| October 2016 | 71 | 58 | 81.69% | 2 |
| April 2016 | 37 | 16 | 43.24% | 0 |
| October 2015 | 75 | 50 | 66.67% | 0 |
| February 2015 | 6 | 3 | 50.00% | 0 |
UPDATES
Monitor announcement of results on this page or visit the official website of PRC (prc.gov.ph) for more information.
— The Summit Express
0 comments:
Post a Comment